Schlage Lock

How to Change the 4 Digit Code on a Schlage Lock?

Do you want to know how to update the four-digit code on a Schlage lock? You must simultaneously hit the Schlage button and the number 1. Three times, the Schlage button will beep and flash. After that, you may input your new code. Wait until the Schlage button no longer flashes and beeps. Enter your new code again.

If you don’t know how to change the code on a Schlage door lock, just follow the steps and gather the necessary stuff. This lesson will only take you five minutes if everything is done correctly.

There are two kinds of Schlage keypad codes.

Before you can program a Schlage keypad, you must first comprehend the two sorts of codes: six-digit programming codes and four-digit user codes.

6-Digit Programming Code

The programming code is a six-digit code that is used to program the lock but does not unlock it. To program the lock, you must know this code.

The default programming code may be found in the User Manual or on the back of the keypad on a yellow sticker (must remove the keypad from the door to find the code).

4-Digit User Codes

The user code is a four-digit code that is used to open the lock. The default user codes can also be found on the back of the keypad or in the User Manual.

Up to 19 4-digit user codes, including a primary entrance code and visitor codes, can be stored! This code must differ from the first four digits of the given programming code.

What will Need if Change the Code on a Schlage Lock

If you don’t have the necessary tools, changing the Schlage 4 digit code might be difficult. Check that you have all of the necessary things before beginning the instruction. You won’t have any trouble finding these products. They may be inside your home. If not, you may get them at your nearest neighborhood store.

Prepare a pen to write down your new code.

Notepad – If you desire a copy of your new code, a notebook will come in helpful. It would come in handy if you forgot the code to your Schlage lock. A casebound notebook is one possibility.

Eyeglasses (optional) – This item is only needed if you have poor eyesight. If not, you can proceed to the tutorial without a pair of eyeglasses.

How to Change the Code on a Schlage Lock

Follow these instructions to modify the default 4-digit code on a Schlage lock.

Step 1: Identify your programming code.

If your lock is fresh new, you can find the original programming code on your handbook or behind the outer face of the keypad (which requires you to take the keypad off the door). If the lock has been used or if you have forgotten your prior entry code, you must reset the keypad to its default settings (Click here to jump down to that section).

Step 2: Type in your programming code.

Then, on the keypad, input your six-digit programming code. The Schlage button will flash orange three times before beeping three times.

Step 3: Press the Schlage and number 1 buttons at the same time.

Press the Schlage button and then the number 1 on the keypad at the same time. The Schlage button will glow orange three times and beep three times again.

Step 4: Fill in your new entry code.

On the keypad assembly, enter your new user code.

This must be a one-of-a-kind code that is not presently in use as a primary or guest admission code. It also cannot be your programming code’s initial four digits.

Step 5: Re-enter your 4-digit code to confirm.

Enter the same four-digit code again to confirm your new code. If everything goes as planned, the Schlage button will flash green, followed by a lengthy beep to confirm your new code. To confirm that everything worked well, run the code!

How to Add Another 4 Digit User Code on a Schlage Lock

Schlage keypad locks may save up to 19 different user codes, which you can share with friends, family, or neighbors. Guest codes are useful since they allow you to generate temporary codes that can be easily erased afterwards.

To add more 4-digit user codes, follow the procedures below!

Step 1: Enter your six-digit programming code.

On the keypad, enter your 6-digit programming code. The Schlage button will flash orange three times before beeping three times.

Step 2: Press the Schlage button, followed by the number 1.

Then, on the keypad assembly, hit the Schlage button and then the number 1. The Schlage button will glow orange three times before emitting three lock sounds.

Step 3: Type in your new four-digit code.

On the keypad, enter your selected four-digit admission code.

This must be a one-of-a-kind code that is not presently in use as a primary or guest admission code. It also cannot be your programming code’s initial four digits.

Step 4: Verify your four-digit code.

Enter your new code once more to confirm it. If everything goes as planned, the Schlage button will flash green, followed by a lengthy beep to confirm your new code. To confirm that everything worked well, run the code!

Rep the previous procedures to add more codes. Up to 19 user codes can be stored in Schlage keyless entry locks!

Follow the procedures in the following section to delete a temporary code!

Tips for safeguarding your house with a new Schlage lock code

1. Change your code on a regular basis.

Every year, you should change the code on your Schlage lock. Changing your code on a yearly basis helps to guarantee that your house is as secure as possible and that unauthorized persons do not gain access to it. Also, be sure to modify the first code that comes with your deadlock.

2. Avoid using obvious codes such as your birthday or address.

Using a guest code is another excellent technique to keep your property secure. Guest codes are useful since they allow you to generate temporary codes that can be easily erased afterwards.You can keep track of who has access to your house and for how long by utilizing guest codes.

3. Do not give out your primary entrance codes to anybody else.

Make sure not to use the same 4-digit user code as your primary entry code when generating a new 4-digit user code. This is significant since revealing your primary entrance code provides others access to your house, which might lead to theft or other crime. Always keep your main entrance code private!

4. Remove guest codes when they are no longer required.

If you no longer require any guest codes, make sure you remove them from the keypad. This will prohibit future users from utilizing the code.

FAQS

Why am I unable to create a new user code?

One of the reasons for this is that your schlage lock already has 19 codes. You can remove one user code to make room for another.

Another cause might be that the second code you entered did not match the first. Enter the code once more.

It’s also possible that the new code you submitted was identical to your programming code.

How will I get my Schlage lock back to factory settings now that I’ve misplaced my programming code?

Disconnect the battery after removing the battery cover from the inner component of the lock. As you reconnect the battery, press and release the Schlage button. Press the Schlage button until a green light flashes and a beep is heard. You have 10 seconds to complete the last step.

In a Schlage lock, where is the programming code?

The Schlage lock’s default programming code may be found on the label of the programming guide included with your box. If it isn’t there, you can look on the back of the lock. To check the code, you may need to remove your Schlage lock from the door.

Schlage Lock

Conclusion

Do you agree with our explanation of how to alter the four-digit code on a Schlage lock? It is simple to learn schlage smart lock change code 4 digit by carefully following the procedures. You won’t require expert assistance because the directions are simple and straightforward.

If you found this information about schlage keyless lock change code beneficial, please share it with your friends and family members who are having difficulties changing their codes. You can also share your thoughts and opinions about the lesson with us. Simply write a remark below.

Leave a Reply

Your email address will not be published.

Kwikset Smart Lock Previous post How to Change the Code on Kwikset Smartcode? With Easy Steps 
Pick Car Door Locks Next post How to Pick Car Door Locks? With 7 Methods